Laying the feeding tube

• Lay the feeding tube from the pressure reducer/tank to the plants.
• The feeding tube is easier to lay when you heat it up (warm water, sun) prior to assembly. Do not kink the tube!
• Cut the tube through and insert a T-piece (1) for every tube. Use an end-piece (2) at the end of the system.
• Always push on the tubes completely (3).
• The pre-assembled drip tubes in the set can also be left on the T-piece/end-piece for first-time assembly.

Info: The feeding tube is not suitable for direct laying in the soil or in walls. Use an empty conduit in this case; joints must remain accessible.