Setting & Checks
SETTING
- Turn on the water tap and check that all the sensors are “closed”. There must be no drips coming from anywhere! If necessary, tighten the setting screw further.
- Begin with the setting at the last Tropf-Blumat in the system so that the system is vented.
1. Turn open the setting screw in anticlockwise direction until water runs out of the drip tube.
2. Close the setting screw again slowly until no more water emerges. Just one drop of water should remain on the drip tube.
3. Finally close the setting screw another 1/4 turn (2 marking arrows).
3. Finally close the setting screw another 1/4 turn (2 marking arrows).
CHECKS
- Check the water discharge for several days after installation. Readjust, if necessary by turning open (= more water) or close (= less water). Adjust carefully, 1/2 an arrow will usually suffice.
- Do not let a dry soil surface fool you. The water spreads out underground. In most cases, only the area under the drip tube is visibly moist.
Always leave the tap open/refill the water tank in time. Even in rainy weather. If the water supply is cut off for any length of time, the roots draw the water out of the Tropf-Blumat. A Tropf-Blumat that is not filled with water does not work!
Tropf-Blumat User Manual
INTELLIGENT WATERING
DIE INTELLIGENTE BEWÄSSERUNG
L'ARROSAGE INTELLIGENT
L'IRRIGAZIONE INTELLIGENTE
LA IRRIGACIÓN INTELIGENTE
A IRRIGAÇÃO INTELIGENTE
DE INTELLIGENTE BEWATERING
DEN INTELLIGENTA BEVATTNINGEN
ÄLYKÄS KASTELUJÄRJESTELMÄ
DEN INTELLIGENTE VANDING
DEN INTELLIGENTE VANNINGEN
INTELIGETNE NAWADNIANIE
CHYTRÉ ZAVLAŽOVÁNÍ
INTELIGENTNÉ ZAVLAŽOVANIE
AZ INTELLIGENS ÖNTÖZÉS
SISTEM DE IRIGARE INTELIGENT
ИНТЕЛИГЕНТНОТО НАПОЯВАНЕ
ΤΟ ΕΞΥΠΝΟ ΠΟΤΙΣΜΑ
INTELLIGENTNE KASTMINE
VIEDĀ APŪDEŅOŠANA
IŠMANUSIS LAISTYMAS
INTELIGENTNI SISTEM ZA ZALIVANJE
INTELIGENTNO ZALIJEVANJE
INTELIGENTNO ZALIVANJE
AKILLI SULAMA
ИНТЕЛЛЕКТУАЛЬНЫЙ ПОЛИВ
インテリジェントな自動給水システム