Water supply
Option A
Pressure reducer
- Connect the pressure reducer to a water tap or a pump with a compensation vessel.
- The pressure is regulated constantly to 1 bar.
- The plants may be standing up to 4 metres higher or 3 metres lower.
- Up to 250 Tropf-Blumat sensors can be supplied by one pressure reducer.
Video guide Products
Important note:
The pressure reducer must be protected against frost.
Option B
Tank connector
- Fit the tank connector to any container. To do this, drill a hole with a diameter of 12 mm.
- The tank must always be higher than the plants (water level at least 0.5 m and max. 14 metres higher).
- Fit the tank filter additionally, especially when using rain water.
Our recommendation: The water level should be at least 1 metre above the sensors.
Video guide Products
TIP: Install a shut-off valve in the feeding tube after the tank connector. This makes it easier to set and clean the tank later.
TIP: An opaque tank with lid reduces the growth of algae.
Tropf-Blumat User Manual
Intelligent Watering
Die Intelligente Bewässerung
L’arrosage Intelligent
L’irrigazione Intelligente
La Irrigación Inteligente
De Intelligente Bewatering
Интелигентното Напояване
Chytré Zavlažování
Den Intelligente Vanding
Intelligentne Kastmine
Το Εξυπνο Ποτισμα
Älykäs Kastelujärjestelmä
Inteligentno Zalijevanje
Az Intelligens Öntözés
インテリジェントな自動給水システム
Išmanusis Laistymas
Viedā Apūdeņošana
Den Intelligente Vanningen
Inteligetne Nawadnianie
A Irrigação Inteligente
Sistem De Irigare Inteligent
Inteligentno Zalivanje
Интеллектуальный Полив
Den Intelligenta Bevattningen
Inteligentni Sistem Za Zalivanje
Inteligentné Zavlažovanie
Akilli Sulama